News
Wednesday, 19. February 2020
Ningbo Powerway (Boway) goes for Otto Junker quality and engineering
Annealing Lines with strip flotationfurnaces
In August 2019, Ningbo Powerway New Material Co., Ltd. (Boway) of Ningbo, China placed an order with OTTO JUNKER for the supply of two continuous annealing lines with strip flotation furnaces for copper strip.
Thursday, 6. February 2020
Altek Döküm relies on proven OTTO JUNKER quality
Strip degreasing, annealing and pickling line
Based in Istanbul in Turkey, the company Altek Döküm Hadde Mamulleri San.S. A. placed an order with OTTO JUNKER GmbH for a strip flotation furnace in December 2019. The furnace will be integrated into a continuous strip degreasing, annealing and pickling line for copper and copper alloys.
Wednesday, 20. November 2019
UAC takes off
OTTO JUNKER is on board too
UAC, one of the leading suppliers of hard alloy extrusions with international orientation, certified according to the latest standards, awarded OTTO JUNKER as supplier for one induction furnace with overhead cross conveyor for a new location in the immediate vicinity of the airport Baia Mare. In the future, extruded aluminum tubes and titanium profiles for the aerospace industry will be produced there.
Tuesday, 21. January 2020
60th IFC Portoroz (SI)
Portoroz
16.09. - 18.09.2020
Congress Centre des Hotel Slovenia | Portoroz | SloveniaTuesday, 21. January 2020
FNA - Furnaces North America 2020
Louisville, KY
30.09. - 02.10.2020
Marriott Louisville Downtown | Louisville, KY | USA
Stand 701 - 703Â
Â
Tuesday, 21. January 2020
Aluminium 2020
Düsseldorf
06. - 08.10.2020
Messe Düsseldorf | Düsseldorf | Germany
Stand 10F43ÂTuesday, 21. January 2020
METAL Kielce
Kielce
14. - 16.10.2020
Kielce exhibition and congress centre | Kielce | Poland
at the booth of GUSS-EX Sp. z o.o.Â
Tuesday, 21. January 2020
METAL-EXPO, Moscow 2020
Moscow
10.11. - 13.11.2020
VDNKha Exhibition Center, Hall 75 | Moscow | Russia
at the booth of GUSS-EX Sp. z o.o.Â
Monday, 5. August 2019
Optical Coil Protection (OCP)
Increased safety through early detection of wear and crucible damage
OCP is a patented system for measuring local temperature
distributions on the inner face of coils installed
in coreless induction furnaces.Thursday, 14. March 2019
EJ: Maximize the productivity, flexibility and savings
by using the modern ladle pouring system by Induga – ‘Puma Pro’
North American Foundry Company EJ (headquarters in East Jordan, MI), well known for municipal castings, is successfully using in their new foundry the innovative Ladle Pouring system Puma Pro from Induga.
Friday, 23. November 2018
Aluminium and copper are still going strong in automotive manufacture
OTTO JUNKER is your competent partner.
While the company covers virtually the full range of metals with its induction melting systems, its thermoprocessing equipment focuses entirely on the heat treatment of aluminium and copper. This includes, for example, solutions for the production of extruded aluminium profiles, strip flotation furnaces as well as heat treatment and ageing furnaces up to recycling.
This is where OTTO JUNKER, with over 90 years‘ experience in furnace manufacture, proves a competent partner to the semi-finished products industry, tiered suppliers, and automotive manufacturers.
Thursday, 5. April 2018
Performance upgrade and process optimization
Vertical furnace optimized by OTTO JUNKER
In close cooperation between the engineering and maintenance department at Aurubis Zutphen and OTTO JUNKER, a concept was developed to replace the existing horizontal pre-heating zone with two additional vertical heating zones.Â
Friday, 9. March 2018
Otto Junker Symposium in Hangzhou
Induction Melting and Pouring Technology
Otto Junker Metallurgical Equipment (Shanghai)
Ltd. (JMS), as the wholly-owned subsidiary of Otto Junker GmbH, is trying to get into a tradition to hold a symposium at the beginning of every second year.ÂMonday, 14. March 2016
Advanced Technology of Continuous Annealing Line for Aluminium Strips
JUNKER Symposium 2016 in Chengdu
